- 8" slow speed grinder, but a cheap bench grinder can work (just make sure to keep it cool and leave 1/32" from the tip to remove by honing)
- Norton 3X wheel or white aluminium oxide if not available
- diamond dressing tool
- (optional) Veritas Side Clamp Guide - 60€
- (optional) MDF with honing compound
- trueing block or diamond plate to flatten water- and oilstones, e.g. DiaFlat - 75-250€
- 1/5/8k shaptons or some other 1k/6k combo stone - 50-90€ each
- trueing block or diamond plate to flatten the waterstones, e.g. DiaFlat - 75-250€
- alternatively a thicker piece of glass with a coarse sandpaper can work
- baggmuck/ikea boot tray or any other place to keep the water mess at bay - 5€
- small water bottle (spray or squirt)
- Norton India combi oil stone (80/360) - 19€
- Finer combi oil stone, e.g. Kunsuto (2000/4000) - 25€
- sharpening oil
- (will require a trueing plate eventually, though a flat surface (plate or float glass) with sandpaper might work)
- plywood base
- Atoma or DMT (extra) coarse, fine, extra fine - 60-100€ each
- water or window cleaner
- plywood base
- diamond sheets (extra) coarse, fine, extra fine - set for 20€ or individual sheets ~10€
- double sided tape
- water or window cleaner
(also see https://paulsellers.com/2020/03/edge-sharpening-under-10/)